To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Rhino-Rack Vortex Aero Crossbars - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. It's Evangeline here at etrailer and today we'll be taking a look at our Rhino-Rack Gutter Mount Legs which are 8 1/4 inches tall here at etrailer. So these are going to be ideal If you have a Jeep, if you have a van, if you have a vehicle with either factory mounted gutters or if you install those gutters yourself but you also want a way to build or make a Rhino-Rack system. So these are your slightly taller than average gutter mount legs and that's gonna be ideal if you need a little extra height or clearance. Maybe you're carrying around skis with extra large bindings and you need that clearance underneath. Or maybe the way you have your gutters mounted is a little bit below the roof level compared to other vehicles.
Whatever situation you're in, let's see if this video will help you out with figuring if these are the right legs for you. So the towers themselves are made of nylon so that is a little bit more lightweight than let's say the steel towers you would see on your more traditional, let's say naked roof towers or the ones that clamp onto your roof. So this nylon again is lightweight but it's also UV resistant. So as you have this on your roof, as you have this on your gutter, it is gonna be exposed to the elements. It is going to be exposed to the sun and that's where their UV resistance comes in handy because you don't want it deteriorating underneath the sunlight.
With this being lightweight though, there is a glass reinforcement on the inside and that adds to its weight capacity as well as its durability. So the actual height measurement of this is going to be 8 1/4 inches tall. So that height is going to be from the channel of your gutter to right where your crossbar is attached. So it's not the total height but the usable height of your tower. So from there, you can then estimate from the underneath your crossbar, whether it be your Vortex crossbar or your square crossbar, that's gonna be the clearance you have from your roof to your crossbar.
So measure your own gutter mount or your own channel to see if this will work with your vehicle. Now, this is not using lock and key to secure it. What it does use is its own hex tool or hex key. It has its own special shape from Rhino-Rack and this is what is used to either tighten down or loosen the bolts holding the clamp into place. So if someone does not have this special hex tool, they won't be able to undo it.
So not the same as having your own key and your own lock keyed to or keyed to itself but it's still a form of security measure. Now the install process is really simple for these. All you need is a gutter to mount these towers to. You need the kit itself, you need your crossbars and you need some tools. So my final thoughts about these gutter mounts is that they give you a pretty decent height or clearance above your roof. So whether you have certain vehicles where you need access to the sunroof and you're worried about those really low profile bars that don't give you enough, if you have, let's say cargo or items that you are carrying that require a little bit more clearance like your skis with large bindings. Or if you have, let's say a solar panel on top of your roof and you just wanna get above that, this might be a great option for you. If you're just using a roof rack as a roof rack and you're not concerned about clearance but maybe a little bit more about looks, check out our recommended fit for your vehicle. Those are usually a little bit more low profile, look a little bit more factory like. They'll give you as much clearance but again, there's pros and cons, it does depend on you and your situation but I hope this video helped you out with that decision making. And that was a look here at our Rhino-Rack Gutter Mounted Legs which are 8 1/4 inches tall here at etrailer. My name is Evangeline and I hope this helps you out. Enjoy the journey..
Average Customer Rating: 4.6 out of 5 stars (7 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
It didn’t feel secure on the rain gutters of the Jeep as the tightening mechanism forced the clamps to move outward from the gutters. I used it only a couple of times. Wouldn’t recommend.
Using these and other Rhino components, I installed a roof rack for a 2021 Jeep Wrangler with a retractable roof. So far this set-up has worked as exactly as expected.
The Rhino racks purchased were exactly what I needed to carry kayaks on my 2015 Transit 250. The vehicle specific brackets were perfectly made.
Unfortunately the parts shipped didn't match the invoice and I ended up with mismatched parts.
When I called etrailer.com customer service, we worked out the problem and the new parts were shipped asap with the understanding I would return the incorrect parts promptly.
Overall, a great experience.
My vehicle was a Jeep Gladiator. The feet worked, but the part that clamps to the gutter could be improved. The clamps pull at an angle to the gutter instead of flat. They had a tendency to pull out. They needed adjustment, in my opinion, as I thought they could work themselves off. I had an aero bar and kayak carriers attached to the feet.
Works great for our JL with the power t op
This was my first purchase with strainer and I just installed the rack so I have no input on durability but the install was super easy, I knew these would fit because the website made it easy to find products compatible with my Ram Promaster 1500, and Kaylyn was proactive and let me know their 71” bars were out of stock but 65” were available. Unbeknownst to her, I’m in a time crunch and her help came in clutch. I would definitely recommend buying from etrailer.
Durable and quiet
Very nice crossbars. Paired with matching RLT600 legs, it sits nicely on my Roll-n-lock bed cover
I think it just looks good first of all. I can carry my paddle boards and still use my one touch roof top.
These are what it took to make my Rhino gutter mount legs fit my Rhino aero bars.
Upon ordering all the roof bars & legs for my Ford E350, it wasn't mentioned that I would be needing these adaptors. Ultimately, etrailer helped me figure out what it takes.
Seems that replacing the 3/8" bolt with the 6mm bolt that these adaptors come with might be sketchy. Although these hard plastic plates have a boss that locates them well. I used anti-seize on all fasteners.
Everything went together fine. Always happy to do business with etrailer!!
Exactly what was needed to adapt my Rhino Rack legs to the Vortex Bars. One package came with one square nut un-threaded. etrailer got me another set out quickly so I could get my rack back together.
Figuring out a way to mount two solar p anels
I'm absolutely in love with Katie, my sales consultant for her great help & excellent follow up. Fully expecting cheap Chinese junk. I was delighted with the quality of the product, (Rhino Rack) which was received day after New Years. Pretty cool when order was placed Dec 29th. Simple illustrated instructions made pre assembly a snap. Wind chill is 2 below zero so I'm going to wait a day or so to mount to car. Two thumbs up from me!
Fit perfectly with other parts.
No issues carrying 2 bikes and a kayak full time around the country. Part of or retrax truck bed system.
Perfect!!! Very easy
I needed to get this order delivered on a tight schedule, and etrailer came through for me. Everything as ordered and delivered quickly. Great buying experience (as usual)
Quality products. Customer support top notch!
I think these need to be improved for a Jeep. They clamp at an angle and tend to work towards the edge of the gutter.
Awesome fit; Awesome quality; Awesome staff!! Even though we experienced some challenges, Emily and others made sure we resolved them and ultimately ended up with a solution that few others have proven. THANKS to the team!!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.